STAIR CALCULATION

Locked
LaurenScobie
Posts: 2
Joined: Thu Feb 14, 2019 4:54 pm

STAIR CALCULATION

Post by LaurenScobie » Thu Jun 27, 2019 3:29 pm

Best method for getting results for Stair calculation at specific height of the Stair Case ?
new to Dialux and never done Stair calculation before

Csuleiman
Posts: 1661
Joined: Wed Mar 07, 2012 3:07 pm

Re: STAIR CALCULATION

Post by Csuleiman » Fri Jun 28, 2019 8:15 am

Hi LaurenScobie,

To simulate a staircase in DIALux 4.13.0.2 we would like to recommend the following workflow:

Please insert a cube and adapt it to the geometry of the first stair (e.g. position: 1, 1, 0.1 ; geometry: 0.2, 1, 0.2). Right-click the inserted cube and select "Copy along a line" in the context menu. Please fill in the quantity of the whole staircase minus 1, as the first stair has been placed already. The distance can be defined as X=0,2; Y=0 und Z=0,2. In case that you would like to add a handrail, please insert another cube and modify it to the geometry required. In this way, you will create a staircase adapted to your guidelines.
The alternative solution is to import the staircase as a 3D object via the SAT or 3DS interface. In this way, you can create the furniture file in the CAD program you prefer, save it as a SAT or 3DS file and import this file into DIALux.

You can either create a calculation surface on each step. Alternatively, it is also possible to place a calculation surface (type: "Vertical illuminance"; setting via Property Page "Calculation surface" in the Inspector for surface selection) over the staircase according to the inclination of the staircase to determine illuminance.

Best regards,
DIAL Support Team

Locked

Who is online

Users browsing this forum: No registered users and 1 guest