Dear Joost,
This is not possible. The standard for tunnel lighting is also not implemented in our evo software.
Best regards,
Your DIAL Support Team
Search found 1376 matches
- Tue Oct 22, 2019 12:35 pm
- Forum: Using DIALux evo
- Topic: Tunnel lighting (2)
- Replies: 3
- Views: 796
- Mon Oct 21, 2019 2:17 pm
- Forum: Problems
- Topic: Walls do not render in calculation
- Replies: 5
- Views: 780
Re: Walls do not render in calculation
Dear pks, Please have a look at the following article of our DIALux evo knowledge base, which shows you an overview of our system requirements: http://evo.support-en.dial.de/support/solutions/articles/9000062586-hardware-requirements As far as the performance (the calculation) is concerned, the grap...
- Thu Oct 17, 2019 5:05 pm
- Forum: Problems
- Topic: Walls do not render in calculation
- Replies: 5
- Views: 780
Re: Walls do not render in calculation
Hello pks, For me it was no problem to calculate your project file so that all walls were properly calculated. I suspect that on your computer the project was not calculated completely, because the main memory on your computer was too full. You can try two things: First, you can delete the imported ...
- Wed Oct 16, 2019 11:44 am
- Forum: Using DIALux evo
- Topic: Geschosszugehörigkeit der Ergebnisse von Brechnungsflächen in Treppenhäusern
- Replies: 3
- Views: 863
Re: Geschosszugehörigkeit der Ergebnisse von Brechnungsflächen in Treppenhäusern
Hallo Krose,
eingefügte Berechnungsflächen werden immer einer Etage zugeordnet. Wir werden diesen Punkt auf unsere Verbesserungsliste für zukünftige evo-Versionen setzen.
Mit freundlichen Grüßen
Ihr DIAL Support-Team
eingefügte Berechnungsflächen werden immer einer Etage zugeordnet. Wir werden diesen Punkt auf unsere Verbesserungsliste für zukünftige evo-Versionen setzen.
Mit freundlichen Grüßen
Ihr DIAL Support-Team
- Tue Oct 15, 2019 9:02 pm
- Forum: Using DIALux evo
- Topic: Swimming Pool Jacuzzi Light Effect in Dialux Evo 8.2
- Replies: 1
- Views: 653
Re: Swimming Pool Jacuzzi Light Effect in Dialux Evo 8.2
Hi SAIMAANWAR, Please read the following threads of our DIALux forum to answer your question: https://dxboard.dialux.com/viewtopic.php?f=30&t=77875&hilit=swimming+pool https://dxboard.dialux.com/viewtopic.php?f=2&t=78255&hilit=swimming+pool https://dxboard.dialux.com/viewtopic.php?f=2&t=81982&hilit=...
- Tue Oct 15, 2019 9:00 pm
- Forum: Using DIALux evo
- Topic: Tunnel lighting
- Replies: 1
- Views: 629
Re: Tunnel lighting
Dear Joost, Please be informed that the feature of tunnel lighting according to the standard is not available in evo at present. We are pleased to tell you that we already added this point as a suggestion for improvement to our improvement list for the upcoming evo versions. The following YouTube vi...
- Tue Oct 15, 2019 8:56 pm
- Forum: Problems
- Topic: Dialux 4.13 - My Database
- Replies: 2
- Views: 700
Re: Dialux 4.13 - My Database
Hi DSI_Groupe_IDEC,
Please read the following article of our DIALux knowledge base to answer your question:
https://dialux4.support-en.dial.de/supp ... -database-
Best regards
Your DIAL Support Team
Please read the following article of our DIALux knowledge base to answer your question:
https://dialux4.support-en.dial.de/supp ... -database-
Best regards
Your DIAL Support Team
- Tue Oct 08, 2019 9:16 am
- Forum: Using DIALux evo
- Topic: Calculation Properties
- Replies: 1
- Views: 694
Re: Calculation Properties
Dear Christophe, Absence factor: The higher, the more likely it is that the room is not occupied. E.g.: Office 0 -> Always someone there -> Little possibility to save energy Archive 0.98 -> Almost no one around -> Many ways to save energy Partial service factor: In short: If the building is not used...
- Fri Sep 27, 2019 9:07 am
- Forum: Problems
- Topic: problems with report when using 2 floors and lightplan
- Replies: 3
- Views: 762
Re: problems with report when using 2 floors and lightplan
Dear
Have you also worked with a newly drawn space over the two floors, as described in the article?
If so, please send us the project file with some explanatory screenshots and a link to this thread for analysis to the mail address 'Support@dial.de'.
Best regards,
Your DIAL Support Team
Have you also worked with a newly drawn space over the two floors, as described in the article?
If so, please send us the project file with some explanatory screenshots and a link to this thread for analysis to the mail address 'Support@dial.de'.
Best regards,
Your DIAL Support Team
- Fri Sep 27, 2019 8:15 am
- Forum: Using DIALux evo
- Topic: DWG-Positionierung
- Replies: 1
- Views: 624
Re: DWG-Positionierung
Hallo dav_id,
die einzige Möglichkeit eine DWG in unserer evo-Software zu verschieben ist mit Hilfe der Positionierung-Optionen:
Mit freundlichen Grüßen
Ihr DIAL Support-Team
die einzige Möglichkeit eine DWG in unserer evo-Software zu verschieben ist mit Hilfe der Positionierung-Optionen:
Mit freundlichen Grüßen
Ihr DIAL Support-Team